Marantec LC 1000
Garage Door Opener Model LC 1000 from Marantec.

Amazingly quiet operation
Designed for a smooth operation of doors up to 14ft high with a faster open and close cycle
Features maximum run timer, a programmable mid-stop, a timer-to-close, a safety reversal system and an advanced drive system
Marantec America is UL 325- 2010 Compliance
We are very proud to announce that Marantec’s LC 1000 commercial door operator has achieved full compliance with the latest UL 325-2010 requirements. Effective as of May 1st 2010, The LC 1000 Light- Duty Trolley Commercial Operator will be manufactured to meet and exceed the latest requirements by UL 325-2010 and other applicable regulations such as National electrical Code (NEC), National Fire protection Association (NFPA) and local, state and county building codes. Effective August 29, 2010, Underwriters Laboratories (UL) will require all commercial door operators manufactured on or after this date to be fully compliant to UL 325 -2010, the standard to which commercial door operators must comply in order to achieve UL listing and bear the UL mark.
EOS - Easy Operating System
EOS is a new paradigm in garage door opener setup and control. It Provides a user-friendly set up which makes for a more efficient and faster installation
Safety Reversal
Safety reversal (sensing technology) system, door stops from closing upon contacting a person or object.
Manual emergency release
Manual emergency release in case of power failure Programmable mid-stop, On-Command Door Activation (OCDA™), programmable “open” mid-stop position allows the door stop during open travel at any point
Maximum Run Timer
Protects against damage to door and operator, door stops and reverses Electronically Controlled - Prevents premature door and operator wear and provides quieter operation Advanced plug-in design compact fluorescent light (CFL) system. One (1) bulb, 14W Max – not provided (equivalent to a 60W incandescent). The light fixture has an integral high impact, heat resistant, UL recognized plastic, lens cover.
Timer – to – close
Timer – to – close feature with programmable timers; photo eyes required
Self Learn Force System
Monitors and controls motor force every cycle (Smart Motor™) to optimize operation force requirements
Soft Start/Soft Stop
Electronically Controlled - Prevents premature door and operator wear and provides quieter operation
Self-Diagnostic System
LED error code indicator for a more efficient (quicker) installation and system troubleshooting
System reset function
System reset function clears the system memory and restores default system settings
Drive System [Rail]
The best in advanced engineering and materials. One semi closed fully assembled drive system with a 14 Ga. (2 mm) heavy duty, high strength galvanized steel finished C-rail, available with a steel-reinforced belt or a full steel chain.
Drive system configuration availability
7ft, 8ft, 10ft - chain or belt • 12ft, 14ft - Belt Only
Drive system overall length for a 7ft. door
10’-5”
Door Heights Supported
7ft, 8ft , 10ft, 12ft and 14ft.
3-button control station
Momentary contact to open and stop with constant contact to close. Open/close/stop functionality with lock capability.